R37I IR Illuminator – TOMAR Traffic

R37I IR Illuminator

  • TOMAR Revolution Illuminators provide system-matched LED illumination to aid in the identification of targets on still or moving image capture equipment.
  • SKU:

Enter your email in the form below to get notified when this product is avaiable for purchase



PRODUCT OVERVIEW

TOMAR’s R37I Revolution Series IR Illuminators are key components in any system where a camera is used for license plate recognition (LPR), video tolling, security CCTV surveillance or parking lot access control that requires a high-power, rugged infrared or visible pulsed illuminator.

Our weather-proof, externally triggered, pulsed illuminators provide high energy, short duration, pulses for capturing motion at up 120Hz rates. LED wavelength options include 850nm and 940nm infrared and visible options including white, red, blue, or other colors.

Combinations of wavelength, with independent intensity settings, such as IR and white can be used to optimize image capture for varying target types and ambient lighting. With eight available optical diffusers, TOMAR Illuminators can be optioned for close-range wide angled illumination, to long-range point targets, or any distance in between. Specify your Illuminator today and place your order with short lead times and fast delivery from our manufacturing facility in Gilbert, Arizona.

TOMAR’s Revolution LED Illuminators are the ideal solution for illumination of targets for the purposes of video or photo identification. Regardless of the target’s velocity, the Revolution Illuminator works with your video or image capture equipment synonymously to ensure the target is illuminated precisely during capture execution.

As part of the TOMAR Revolution Series, Illuminators have a standard IP69K+ water intrusion rating thanks to TOMAR's patented T-Seal™ technology and TOMAR’s Clear Vision Optics™. A standard 5-Year Warranty accompanies all TOMAR Revolution Illuminators.

SYNCHRONIZED OPERATION

Revolution Illuminators can be triggered to flash at the proper time for video capture, at rates of up to 120Hz, by an optically-isolated 5-24VDC trigger pulse, or via an RS-485 command allowing for hardware or software triggering. When triggered, all LEDs in the illuminator flash together. Tightly controlled trigger delays insure LED flashes occur at consistent times.

The included RS-485 interface allows programming of the following parameters:

  • Illuminator address – allows multiple Revolution Illuminators on one RS-485 interface
  • LED Drive Current (Intensity) – from 0-100% of full in 255 steps
  • Light Pulse Duration – from 100-500uS in 200 steps


Key Features

  • The R37 Illuminator can be triggered two ways to match the needs of your application:
    • Trigger option 1: External 5-24VDC optically isolated digital trigger
    • Trigger option 2: RS-485 command
  • 0-120Hz trigger rate, all LED groups trigger simultaneously
  • 100-500uS Pulse Duration in 250 steps
  • 0-100% Intensity in 255 steps for each LED set.
  • Dimensions: 3.04″ high by 7.23″ wide (3x7)
  • Ability to customize features for your specific requirements
  • Input power: 24VDC +/- 10%
  • Trigger input voltage range: 5-24VDC
  • IP69K+ water and dust intrusion rating using TOMAR's patented T-Seal
  • TOMAR Clear Vision Optics™
  • Designed, engineered, and assembled in our Energy Star manufacturing plant in Gilbert, Arizona.

Potential Uses

The R37I is perfect for any camera that needs to identify a target at any ambient light level:

  • Discreet surveillance: where the use of artificial visible light is not desired
  • License Plate Reading (LPR) of moving or stationary vehicles
  • Video Camera Illuminator
  • Security Camera Illumination
  • Electronic Tolling/Video Tolling
  • Parking lot access control
  • Low-light surveillance – 24 hours/day: where light conditions are less than optimal


    OPTIMIZED PERFORMANCE

    The R37I Revolution Illuminator comprises two sets of LEDs, eight in one set, sixteen in the next, each of which can be a different color or wavelength allowing mixing of visible and non-visible light for the best video capture. Each of the two LED sets has an individual intensity setting so the illuminator output can be adjusted based on exposure needs or ambient light availability. TOMAR Clear Vision Optics, along with a wide range of diffuser selections, makes the R37I easily adaptable to a specific application whether mounted overhead on a gantry, by the side of the road on a pedestal, or under the eaves of a building.

    Product Options

    TOMAR Revolution Illuminators can be customized to meet your project’s specific needs. While the options shown above are limited to select web-orderable options, this series has the ability for the following customizations:

    R37 Illuminator Options

    • Can be split into two (2) different LED selections, oriented by one row plus two rows each (totaling three (3) rows).
    • Can have any choice of diffuser, which covers all LEDs selected.

    IR and LED Light Options

    • 850nm IR
    • 940nm IR
    • White LED (W)
    • Far Red LED (F)
    • Red (R)
    • Blue (B)
    • Amber (A)
    • Green (G)

    Diffuser Options

    • No Diffuser
    • 30° Circular Diffuser
    • 40° Circular Diffuser
    • 80° Circular Diffuser
    • 15×1 Elliptical Diffuser
    • 30x5 Elliptical Diffuser
    • 60x10  Elliptical Diffuser
    • 60x30  Elliptical Diffuser

    Custom Solutions

    IR Illuminator Contact Form