DETOC Detector Series 2 Head, 2 Channel w/ Integrated Confirmation™ Li – TOMAR Traffic

DETOC Detector Series 2 Head, 2 Channel w/ Integrated Confirmation™ Lights


PRODUCT OVERVIEW

TOMAR’s DETOC Series Optical Preemption Detectors sense the optical pulses emitted by properly equipped emergency or transit vehicles. Mounted to observe the approaches of an intersection, DETOC Detectors are used with TOMAR OSPOC Series Optical Signal Processors or GTT Opticom* brand phase selectors to inform the traffic control system of the presence of designated vehicles.

DETOC series detectors are compatible with GTT Opticom brand 200, 500, and 700 series IR or IR/GPS phase selectors, and 200, 500, and 700 series LED and strobe based emitters.

DETOC series detectors can be used in mixed intersections or to expand existing optical preemption systems that use Opticom-brand coded optical signals.

EVP and TSP with Integrated Confirmation™

TOMAR's Integrated Confirmation™ (IC) is an industry first, setting a new standard for reliable visual confirmation to further increase safety, lower response times and streamline installations. A high-power white or blue LED attached to the optical detector receives power via the standard TOMAR M913 EVP detector cable and TOMAR Optical Signal Processor (OSP). This means no additional cable pulls through congested conduits, use of load switches or added power supplies are needed to provide confirmation lights & visual feedback. TOMAR’s STROBECOM II™ IC traffic signal priority system is the only preemption option providing real, closed-loop, visual feedback to first responders.

  • Provides real-time visual feedback to emergency and transit vehicle operators without the need to take their eyes off the roadway by flashing or steady-burn LEDs - This could help reduce collisions between emergency vehicles when two are approaching the same intersection at the same time
  • Provides visual notification to public motorists regarding a preemption event happening

Product Options

  • DETOC22-IC-X: 2-Head, 2-Direction, 2-Channel, 2-LED with Integrated Confirmation™

Key Features

  • Military-derived sensor technology for direct sunlight rejection and detection performance unmatched by any other system.
  • Fully encapsulated electronics for complete resistance to water, heat, and vibration.
  • Complete electronics protection from damage due to mis-wiring or electrical transients.
  • Simple advanced detector installation without any special cabling for enhanced detection around corners and over hills.
  • Tool-less tilt/swivel for each detector head makes aiming easy.

Product Specs

  • Channels: 2
  • Compatibility: TOMAR OSPOCV2 Series OSP Cards; All TOMAR STROBECOM II and Opticom IR LED and Strobe Emitters
  • Confirmation Lights: White or Blue
  • Detection Range: 2,500+/- feet
  • Maximum Cable Length: Up to 900 feet of TOMAR M913 preemption cable between optical signal processor and detector
  • Cable Type: TOMAR model M913 preemption detector cable
    20 AWG 3-conductor shielded cable & bare
  • Field of View: 13 degrees conical centered around viewport normal axis (typical)
  • Operating Temperature: -40 to +75 degrees C
  • Physical Construction: The DETOC enclosure is black, glass filled, UV stabilized poly-amide suitable for all weather use. All electronics circuitry is completely encapsulated in polyurethane for protection from shock, vibration, and moisture
  • Mounting: The DETOC is easily mounted using standard hardware on either span wire or mast arm. The unit has a ¾” female pipe mount hub and internal terminal block for connection to a 3/C shielded detector cable (TOMAR M913)


TRUE 10 YEAR WARRANTY!

10 year warranty covers the DETOC Series and all STROBECOM II components. Unlike other manufacturers, TOMAR’s ten year warranty has no fees or charges for warranty repairs after five years.

*Global Traffic Technologies, GTT, and Opticom are trademarks of Miovision Technologies Incorporated and not affiliated with TOMAR Electronics Inc.

STROBECOM II Overview



Product Cut Sheets and Wiring Guides

3D STEP FILES

STROBECOM II Helpful Links

3D STEP FILES


FAQ's

How far do your emitters send the signal?

TOMAR emitters are detectable from approximately 2500+/- feet

Do TOMAR emitters come with a warranty?

Yes, our 3065 & T792HL style power supplies are backed by an industry leading 10-year warranty. Our 401 power supplies & strobes are backed by a 2-year warranty

Are these IR emitters?

Yes, our optical emitters send a IR or infrared signal

Do they require programming?

No, our emitters do not require programming in order to operate or be detected at intersections but they can be programmed to send a specific code if that is needed.

What is the VLF?

Our emitters are offered with an optional VLF which is a visible light filter to block any visible light from being seen.

Do you offer a handheld version?

Yes, our T792HLB-20V & 3065B-20V provide a full strength emitter option

Can emitters be mounted behind a windshield or on a vehicles dashboard?

Yes, they can be but most vehicles have an IR style windshield. While IR windshields will assist in reducing the heat inside of a vehicle it will also unfortunately reduce the range that an emitter can send a signal.

What is the Envelope of Safety®?

Since 1969, TOMAR has had one primary focus – to provide equipment that can be relied on in an emergency to help save people and property. To focus on that mission while being a value-adder to our community and those we serve worldwide, TOMAR developed the Envelope of Safety®.

Learn More